Nilfisk-ALTO ATTIX 791-2M Operating Instructions Manual Download Page 9

7

ATTIX 791-2M/B1

4.4 Acoustic 

warning

For safety reasons, an acoustic 
warning sounds if the air speed 
in the suction hose drops to be-
low 20 m/s. See section “Trou-
bleshooting”.

 

5  Applications and techniques

5.1 Techniques

If used correctly, additional ac-
cessories, suction nozzles and 
suction hoses can enhance the 
cleaning action and reduce the 
cleaning effort.

Effective cleaning is achieved if 
you follow just a few guidelines 
in combination with your own 
practical experience in special 
fields.
Here are some basic tips.

5.1.1  Picking up dry 

substances

The suction hose diameter must 
suit the position of the switch in 
order to pick up dry, nonflam-
mable dust with maximum room 
concentration values.
There must always be a safety 
filter bag in the tank before dry 
substances with maximum room 
concentration values are picked 
up. See section 9.5 “Accesso-
ries” for ordering number.

To pick up harmless dust we 
recommend the use of a waste 
bag. See section 9.5 “Accesso-
ries” for ordering number. Dis-

posal of the picked up material 
is then simple and hygienic.

After picking up liquids, the filter 
element is wet. A damp filter el-
ement clogs more quickly when 
dry substances are picked up. 
For this reason the filter element 
should be washed and dried or 
replaced by a dry element be-
fore dry substances are picked 
up.

Always use a filter bag/waste 
bag that is suitable for the type 
of dust (see table):

ATTIX 791-2M/B1

Type of dust

Filter bag/waste bag

Handling/waste disposal

• Nonhazardous 

coarse 

dust

• 

Dust with MAC values 

 

1 mg/m³ 

• 

Observe any additional 
national regulations

Waste bag
No. 302001480

Waste disposal - see section 7.2.1

• 

Nonhazardous fine dust

• 

Dust with MAC values 

 1 mg/m³ 

• 

Explosive dust, explo-
sion class St1,St2,St3 in 
zone 22

Filter bag
No. 302001484

Waste disposal - see section 7.2.2

      

Do not pick up flammable 
substances.

5.1.2  Picking up liquids

Always remove the filter bag/
waste bag before picking up 
liquids and check that the water 
level device functions properly 
(see section 7.2.5, „Replacing 
the filter element“).
The use of a separate filter ele-
ment or filter screen is recom-

mended.
If foam appears, stop work im-
mediately and empty the tank.
To reduce the amount of foam, 
use foam killer Nilfisk-Alto Foam 
Stop (see section 9.5 „Accesso-
ries“ for order number).
 

Do not pick up flammable 
substances.

Summary of Contents for ATTIX 791-2M

















Reviews: