INSTRUCTIONS FOR USE
ENGLISH
SC350
9099122000(1)2011-01
3
SPARE PARTS AND MAINTENANCE
All necessary operating, maintenance and repair procedures must be performed by quali
fi
ed personnel or by Advance Service
Centers.
Only original spare parts and accessories must be used.
Contact Advance for service or to order spare parts and accessories, specifying the machine model and serial number.
CHANGES AND IMPROVEMENTS
Advance constantly improves its products and reserves the right to make changes and improvements at its discretion without being
obliged to apply such bene
fi
ts to the machines that were previously sold.
Any change and/or addition of accessory must be approved and performed by Advance.
OPERATION CAPABILITIES
This scrubber-dryer is used to clean (scrubbing and drying) smooth and solid
fl
oors, in civil or industrial environment, under safe
operation conditions by a quali
fi
ed operator.
The scrubber-dryer cannot be used for moquette and carpet cleaning.
CONVENTIONS
Forward and backward, front and rear, left and right references are intended with the operator in driving position with the hands on
the handlebar (1).
UNPACKING/DELIVERY
To unpack the machine, carefully follow the instructions on the packing.
Upon delivery carefully check that the machine and its packing have not been damaged during transportation. In case of visible
damages, keep the packing and have it checked by the carrier that delivered it. Call the carrier immediately to
fi
ll in a damage claim.
Check that the machine is equipped with the following features:
Technical documents:
–
Scrubber-dryer Instructions for use Manual
•
Electronic battery charger Manual
•
Scrubber-dryer Spare Parts List
•
No. 2 lamellar fuses
•
SAFETY
The following symbols indicate potentially dangerous situations. Always read this information carefully and take all necessary
precautions to safeguard people and property.
The operator’s cooperation is essential in order to prevent injury. No accident prevention program is effective without the total
cooperation of the person responsible for the machine operation. Most of the accidents that may occur in a factory, while working
or moving around, are caused by failure to comply with the simplest rules for exercising prudence. A careful and prudent operator is
the best guarantee against accidents and is essential for successful completion of any prevention program.