27
Original Instructions
FR
EN
thermal sensor has cooled.
Pressure safety device:
• An integrated hydraulic safety valve protects the system
from excessive pressure.
During
work
WARNING!
• It is not allowed to clean asbestos-containing surfaces
with high pressure.
• Risk of explosion – Do not spray fl ammable liquids.
• Never draw in fl uids containing solvents (e.g., gasoline,
heating oil, paint thinner or acetone) These substances
damage the materials used in the machine. Their spray is
highly combustible, explosive and poisonous.
• Never direct the water jet at yourself, other persons, not
even to clean clothing or footwear -
risk of injury.
• Never direct the water jet at pets or other animals.
• Never direct the water jet at live electrical equipment or
the machine itself -
danger of short-circuiting.
• The spray lance is affected by a kickback force of 27.4 N
and a sudden torque when activating the trigger of the
spray handle during operation.
• This high pressure washer machine must not be
operated at temperatures below 0°C.
• Never start up a frozen machine. Frost damages are not
covered by the guarantee!
• Always ensure fi rm and safe footing.
• The machine shall be operated in an upright position.
• If the machine is left or not used for 5 minutes, it must be
switched off on the start/stop switch "
O
" (1).
After
fi nishing the work
WARNING!
• Always switch off the machine and unplug the power plug
from the socket after work and when leaving the machine
unattended.
• Disconnect water inlet hose between machine and water
