Nilfisk-Advance C 100.6 User Manual Download Page 9

6

Original Instructions

EN

DA

NO

SV

FI

DE

FR

NL

IT

ES

PT

EL

TR

CS

HU

PL

HR

SL

SK

LV

LT

ET

RU

ZH

  

After 

fi nishing the work

 WARNING! 

• Always switch off the machine and unplug the power 

plug from the socket after work and when leaving the 
machine unattended.

• Disconnect water inlet hose between machine and 

water supply.

• Wind up electrical cable and high pressure hose – to 

avoid damage of cable, plug, high pressure hose and 
fi ttings.

• Always empty pump, hose and accessories of water 

after use of the machine and prior to storing.

 

 

Maintenance and repairs

  

 WARNING! 

• Always disconnect the electrical plug from the socket 

prior to maintenance, cleaning and repair.

• Any repair should always be made in Nilfi sk 

 authorized workshop with original Nilfi sk spare parts.

• Do not attempt any maintenance not described in the 

instructions.

• If the machine refuses to start, stops, pulsates, pres-

sure fl uctuates, motor busses, fuse blows or no wa-
ter comes out, check the trouble shooting diagram 
in these instructions. In case other problems occur, 
please contact your local Nilfi sk distributor.

 

 

Recycling the high pressure washer

Make the old machine unusable immediately.

• Unplug the machine.
• Cut the electric cable. 

Do not discard electrical appliances with household 
waste. As specifi ed in WEEE Directive 2012/19/EC on 
old electrical and electronic appliances, used electrical 
goods must be collected separately and recycled eco-
logically. Contact your local authorities or your nearest 
dealer for further information.

Summary of Contents for C 100.6






















Reviews: