background image

12

ATTIX 791-2M/B1

9.2 Guarantee

Our general conditions of busi-
ness are applicable with regard 
to the guarantee. Subject to 
change as a result of technical 
advances.

9.3 

Tests and approvals

The vacuum cleaners have been 
tested as specified in IEC/EN 
60335-2-69 including appendix 
AA. All the requirements were 
fulfilled for equipment in dust 
class M.

The cleaners fulfil the test re-
quirements for dust explosion 
protection for industrial cleaners 
and dust extractors for use in 
zone 11, type 1.

Equally, the cleaners fulfil the re-
quirements of the ATEX regulati-
on 94/9/EG for use in zone 22.

The vacuum cleaners must be 
inspected regularly in accord-
ance with national accident pre-
vention regulations (in Germany 
as specified in BGV A2 and DIN 
VDE 0701 Part 1 and Part 3, at 
regular intervals and after re-
pairs or modifications).

A dust test must be performed 
at least once every year by the 
manufacturer or a trained per-
son. This test covers, for exam-
ple, whether there is damage to 
the filter, the vacuum cleaner is 
sealed to the air and the control 
equipment works properly.

9 Further information

9.1 

Recycling the vacuum 
cleaner

Make the old cleaner unusable 
immediately.
1.  Unplug the cleaner and cut 

the power cord.

Do not discard of electrical ap-
pliances with household waste.

As specified in European Direc-
tive 2012/19/EU on old electrical 

and electronic appliances, used 
electrical goods must be col-
lected separately and recycled 
ecologically.
Contact your local authorities or 
your nearest dealer for further 
information.

Summary of Contents for ATTIX 791-2M/B1

















Reviews: