66
Original Instructions
Poseidon 2
EN
3.4 Mounting of quick
coupling
1. Screw the quick coupling
tight on to the water inlet (2).
Note:
The inlet fi lter must al-
ways be fi tted in the water inlet
pipe to fi lter out sand, lime stone
and other impurities as these
will damage the pump valves.
Caution:
Failure
to fi t the fi lter will
invalidate the
guarantee.
3.5 Mounting of high
pressure
hose
Attach the high pressure hose
(4) to the spray handle (7).
4 Operating your pressure washer
4.1 Connection of high pres-
sure hose
Machines without hose reel:
At-
tach the high pressure hose (4)
to the high pressure connection
of the machine (3).
Only max. 7 m additional exten-
sion hose can be added.
Machines with hose reel:
Un-
wind the high pressure hose
completely.
Summary of Contents for Alto POSEIDON 2
