3/2019
A - 19
56091217 - SC901 ST
ENGLISH - A
INSTRUCTIONS FOR USE
MAINTENANCE SCHEDULE
MAINTENANCE ITEM
Daily
Weekly
Monthly
Yearly
Charge Batteries
X
Check/Clean Tanks & Hoses
X
Check/Clean the Brushes/Pads
X
Check/Clean the Squeegee
X
Check/Clean Vacuum Shut-Off Float
X
Empty/Clean Debris Catch Tray in Recovery Tank
X
Check Each Battery Cell(s) Water Level
X
Inspect Scrub Housing Skirt
X
Inspect and clean Solution Filter
X
Purge Detergent System
X
Lubrication of Machine
X
* Check Carbon Brushes
X
*
Have an Authorized Advance Service Center check the vacuum motor carbon motor brushes once a year or after 300 operating hours. The
brush and drive motor carbon brushes should be checked every 500 hours or once a year.
NOTE:
Refer to the Service Manual for more detail on maintenance and service repairs.
SERVICING THE VACUUM MOTOR
Have your Advance Dealer check the carbon motor brushes once a year or after 300 operating hours.
IMPORTANT!
Mot or damage resulting from failure to service the carbon brushes is not covered under warranty. See the Limited Warranty
Statement.
D
A
B
C
D
E
B
LUBRICATING THE MACHINE
Once a month, apply light machine oil to lubricate the:
•
General Pivot Points for the Squeegee Linkage
(A)
.
•
Squeegee Tool end wheels
(B)
.
•
Scrub deck bumper wheel
(C).
•
General Pivot Points for the Brush Linkage
(D)
.
Once per quarter, Grease the following
•
Rear Caster Wheel Swivels
(E)
.
