8/03 revised 7/13 Form No. 56040800 REV D
© 2013 Nil
fi
sk-Advance, Inc.
(page 6 of 7)
Condor XL / ER1300, ER1600 / SC8000 PROGRAMMING INSTRUCTIONS
1
Press and hold the Hazard
(A)
and Headlight Switches
(B)
simultaneously. Turn the Keyswitch
(C)
ON and wait until the Display
(D)
reads
“Con
fi
guration Menu” as shown.
2
Press the Side Broom Raise
(E)
or Lower
(F)
switches to scroll through the list of available options.
3
Once you see the appropriate option on the Display Panel
(D)
press the Scrub ON Switch
(G)
to enter the sub menu for that option.
4
Once in the option sub menu, press the Side Broom Raise
(E)
or Lower
(F)
switches to switch between “Not Installed” and “Installed” and then
press the Scrub ON Switch
(G)
at “Installed” to enable the option.
NOTE:
Pressing the Scrub OFF Switch
(H)
at any time will take you back to
the previous level in the menu.
5
Turn the Keyswitch
(C)
OFF.
CONFIGURATION MENU
Back-Up Alarm
Lights
Lights
Not Installed
Installed
MAIN MENU
OPTION SUB MENU
D
C
G
F
E
B
A
H
