6
Original Instructions
EN
Nilfi sk Select
Stop
Turn off the machine and unplug. Unplug by grasping the
plug, not by pulling on the electric cable.
Connecting hose, tube and nozzles
1
1. Insert the hose connector into the suction inlet until it
engages by a “click” sound.
2. Connect the hose handle to the tube and twist until they
engage with a click.
3. Connect the tube and nozzle and twist until they engage
with a click.
4. The tube is telescopic and can be adjusted to your
height.
Pull out the adjusting handle to extend the tube, and pull
back to shorten to desired length.
Disengage
• Disengage the nozzle from the tube by pressing the but-
ton.
• Disengage the hose handle from the tube by pressing the
button.
• To remove the hose connection from the suction inlet,
press button and disengage the hose.
Change of dust bag and fi lters
The size and quality of the dust bag and
fi
lters affect the
machine ef
fi
ciency. Use of non original dust bags or non
original
fi
lters can cause restricted air
fl
ow which may lead
to machine overload. Using non-original dust bag or
fi
lters
will void the warranty.
The machine is a completely air tight construction. This en-
sures that air and dirt going into the machine, can only get
out through the HEPA
fi
lter in the end.
Changing the dust bag
2
The dust bag indicator shows when to change the dust bag.
Always use original dust bags.
1. Open the lid by pushing at the latch release in the direc-
tion of the arrows.
2. Remove dust bag holder from dust compartment.
3. Remove dust bag from holder. The dust bag can be
closed by pulling the collar handle.
4. Insert the new dust bag by guiding the collar into the
tracks of the bag holder.
5. Place the bag holder in the dust compartment. Check
that the dust bag is correctly
fi
tted into dust compartment.
Changing the pre-fi lter
3
The pre-
fi
lter protects the motor by absorbing micro-particles
that the dust bag can not keep. Change the pre-
fi
lter with
every fourth dust bag. The pre-
fi
lter is located behind the
dust bag. Always use original
fi
lters.
1. Open the lid by pulling up at the latch release.
2. Remove bag holder with bag from dust compartment.
3. Open pre-
fi
lter hatch by pulling handle.
4. Take out the pre-
fi
lter.
5. Fit the new pre-
fi
lter (ensure that the text is readable) and
close the pre-
fi
lter hatch.
6. Place the bag holder in the dust compartment. Check
that the dust bag is correctly
fi
tted into dust compartment.
Changing the HEPA fi lter
4
The HEPA
fi
lter cleans the exhaust air from micro parti-
cles the dust bag can not keep. The HEPA
fi
lter can not be
brushed or washed clean. Comfort and Superior models
have a HEPA
fi
lter indicator that shows when to change
the HEPA
fi
lter. For Classic models, change HEPA
fi
lter for
every 4th dust bag change. Always use original dust bags
and
fi
lters.
1. Open the lid on the back of the machine by pulling the
tap.
2. Take out the HEPA
fi
lter.
3. Insert the new HEPA
fi
lter. Check that the HEPA
fi
lter is
correctly
fi
tted.
NB
: Only touch the
fi
lter plastic frame
4. Put the lid back and close by pushing the tap in. NB: As-
sure lid is fully closed.
Adjust the suction power
All models have a
fi
ve step adjustment on the carrying
handle.The suction power can also be adjusted on the re-
mote handle of the Superior models.
Power
regu
Current level is shown on the carrying handle on Superior/
Comfort models.
Battery replacement in hose handle:
1. Open the lid of the battery holder by
sliding the lid towards the front of the
hose handle.
2. Replace the used batteries with two
new ones, type 1.5V AAA. Make sure
the polarity of the batteries is placed
correct at the bracket.
3. Slide the battery lid back until you
hear a click.
Power regulation -
Power regulation -
Power regu
Current level
