NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 1-305-238-4373
5
INSTALLATION CONSIDERATIONS
(
CONTINUED)
AVOIDING INTERFERENCE
TS120 is designed to work in most applications including with plasma and LCD TV’s and in areas
where CFL lighting and indirect sunlight are present. You should avoid locating the TS120 near
potential sources of electrical or optical noise, such as light dimmers or low-voltage lights.
USING THE POWER STATUS DISPLAY
The Green power status LED can only be activated by a “power status” broadcast from a Niles IR
main system unit (MSU140, MSU250, MSU480, MSU440Z). The IR main system unit will broadcast
the power status signal if the preamp/ receiver is on and a 12V DC adapter is plugged into the
preamp/receiver’s switched AC outlet and the 3.5mm plug is connected to the IR main system unit’s
Status input jack (
Figure 2
).
NOTE: THE 12V DC ADAPTER PLUGGED INTO THE SWITCHED OUTLET OF THE STEREO RECEIVER IS NOT
INCLUDED WITH THE IR MAIN SYSTEM UNIT. IT SHOULD BE 12V DC WITH A MINIMUM OF 100MA OF
OUTPUT. IT CAN BE ORDERED FROM YOUR NILES DEALER (FG01035 POWER ADAPTER).
USING THE TS120 WITH NILES MULTIZONE KEYPADS WITH AN IR CONNECTION
The TS120 is fully compatible with any Niles MultiZone Keypad with an IR connection, follow the
wiring instructions in
Figure 4
. For specific information see your Niles MultiZone Keypad manual.
