Niles StageFront Home Theater Solutions Pro15SW Installation Manual Download Page 7

5

INSTALLATION CONSIDERATIONS

RCA CABLE

For line-level connections, use high-quality RCA cables that feature low impedance, 
double shielding and gold-plated connectors (see 

CONTROLS AND CONNECTORS

 on 

page 

7

). Consult your local Niles dealer for their recommendations.

LOUDSPEAKER WIRE

Use 2-conductor loudspeaker wire for loudspeaker-level connections to the 
Pro15SW and satellite loudspeakers (see 

CONTROLS AND CONNECTORS

 on page 

7

). 

For these applications, we recommend using 16-gauge wire. For wiring runs longer 
than 80 feet, we recommend 14-gauge wire. The Pro15SW’s gold-plated, fi ve-way, 
loudspeaker-level binding posts will accommodate up to 12-gauge wire directly. 
Larger sizes can be accommodated via pin connectors.

RUNNING WIRES IN WALLS OR CEILINGS

When running wire inside walls or ceilings, use special jacketed cable (CL-2 or CL-3) 
to protect the wire and to meet local electrical and fi re codes. In some areas, conduit 
is also required. For a trouble-free installation, low-voltage wire such as loudspeaker 
wire must be run in accordance with the National Electrical Code and any applicable 
provisions of the local building code. If you are unsure of the correct installation 
techniques, wire jacket, or type of conduit to use, consult a professional audio/video 
installer, building contractor, or the local building and inspection department.

PRO15SW PLACEMENT

The StageFront Pro15SW Powered Subwoofer is expressly designed for use in 
home theater and multi-channel bass reinforcement applications. For home theater 
front, center or rear-channel applications, we recommend using StageFront Pro 
or In-Wall models. Models ending in “LCR” are intended primarily for front channel 
left/center/right placement or wherever a monopole design is required. Models that 
end in “FX” are designed for special effect placement. StageFront Home Theater 
Solutions™ Loudspeakers are the perfect choice wherever quality of sound is the 
most important consideration.

THE BOUNDARY EFFECT

Placing a Pro15SW in a corner can powerfully affect the way a listener perceives 
bass response. Known as the boundary effect, a placement close to a corner-wall 
boundary will emphasize certain bass frequencies, while canceling others. This 
effect can make the Pro15SW sound excessively boomy and inaccurate to some 
listeners, while to others it just seems like more bass sound. Some listeners may 
prefer to place the subwoofer (or subwoofers) near the same location as the main 
left/right channel loudspeakers.

(CONTINUED ON NEXT PAGE)

Summary of Contents for StageFront Home Theater Solutions Pro15SW

























Reviews: