18
WWW.NILESAUDIO.COM
6. Pick a spot in the ground which the loudspeaker will cover and drive the
security stake all the way into the ground until the cable holder is completely
under the surface of the ground, as shown in
Figure 12
.
7. Pull on the security cable and verify that the stake is securely held in the
ground.
upgraded seCurity attaChMent Method (optional)
To perform this attachment method you will need the following items:
1. (1) Stainless Steel Eyebolt
2. (1) Concrete Anchor sized to the Stainless Steel Eyebolt
3. (1) Bag of Quikcrete – fast drying cement mix or equivalent
4. A post hole digger or shovel
5. (1) Stainless Steel Aircraft Cable 1/8” diameter or larger
6. (2) Stainless steel wire rope clamps sized to the aircraft cable chosen
Figure 11.
Security Stake
Attachment to Cable
Figure 12.
Security Stake
Driven into Ground
DS00333-0-All_Rock_Spkrs_Manual_RevC.indd 18
11/16/11 11:13 AM
