Step 3 – Connecting the Sensor Cable to the
Table-Top Sensor
Pull out the removable connector from the bottom of the
table-top sensor. Insert each wire into the appropriate hole on
the removable connector plug (Figure 3), and snap the lock-
ing tab down. To help you, the connector plug is keyed. Insert
the smooth side of the connector plug into the smooth side of
the socket. Don’t force the scalloped side of the connector
plug into the smooth side of the socket.
Make sure that the orientation of the connector is correct
(Figure 4).
6
R
E
M
O
T
E
C
O
N
T
R
O
L
A
N
Y
W
H
E
R
E
!
K
I
T
Figure 3: Removable
Connector Plug
1 = Green/White - 12V
2 = Green - DATA
3 = Orange/White - GROUND
4 = Blue - EMPTY
5 = Blue/White - STATUS
6 = Orange - EMPTY
7 = Brown/White - EMPTY
8 = Brown - EMPTY
1 = STATUS
4 = 12V DC
1 = 12V
2 = DATA
5 = STATUS
3 = GROUND
2 = DATA
3 = GROUND
Tab
Down
Figure 4: Installing
Sensor Connector
DS00224CCN_RCA2 Kit.qxp 6/22/04 3:28 PM Page 6
