Operation
You can use the HDL-6 in two ways: play one pair of speakers
at a time, or play multiple pairs simultaneously.
If you intend to play more than one pair of speakers at the
same time, you should become familiar with the operation of
the HDL-6's PROTECTION button.
Playing One Pair of Speakers At a Time
1.
Make sure the amplifier or receiver power is OFF, and set
the volume to minimum.
2.
Locate the ON/OFF button on the HDL-6 that corresponds
to the speaker pair you wish to play. Set it to the ON posi-
tion.
3.
Turn on the amplifier or receiver and select a source, such
as the tuner or CD player.
4.
Slowly turn up the amplifier or receiver volume and set it
to a comfortable (not maximum) listening level. Be careful
not to overdrive or "clip" your amplifier. If the sound
becomes muddy or distorted, you have reached the limit of
your amplifier's volume capability and should reduce the
volume quickly to avoid damaging your speakers.
5.
To turn off the speaker pair, simply press the correspond-
ing ON/OFF button on the HDL-6.
11
H
I G H
D
E F I N I T I O N
S
P E A K E R
S
E L E C T I O N
S
Y S T E M
"TECH TIP"
If your amplifier or
receiver has "A"
and "B" speaker-
pair outputs,
connect the HDL-6
to the "A" outputs.
Do not connect
anything to "B".
This will prevent
the amplifier or
receiver from driving
an unusually low
impedance load.
