background image

Specifications

Model HD•CTR

Driver Compliment
(2) 5-1/4” Magnetically Shielded Mica Filled
Polypropylene Woofers 
1” ElastoDynamic

Hybrid Dome Tweeter

with Fluid cooling

Design Principle
Infinite baffle for large and varying air 
volumes. Directed Sound Field Geometry

for optimum phase and frequency response

Recommended Amplifier Power
Ten to One Hundred Fifty Watts per
Channel

Nominal Impedance
8 Ohms

Frequency Response
45 Hz to 21,000 Hz, plus or minus 3 dB
(on axis)

Sensitivity
90 decibels for 2.83 volts of Pink Noise,
measured at 1 meter on axis

Overall Exterior Frame Dimensions
8-1/4” x 14-1/2”

Depth Behind Wall
3-1/8” (Assumes 1/2” drywall)

Wall Cut-Out Dimensions
7-1/8” x 13-1/4”

Wiring Requirements 
We recommend 16 to 18 gauge for up to
80 feet, 14 gauge for up to two hundred
feet. Connectors accommodate 12 to 22
gauge wire.

Model HD•LRS

Driver Compliment
(2) 5-1/4” Mica Filled Polypropylene
Woofers 
1” ElastoDynamic

Hybrid Dome Tweeter

with Fluid cooling

Design Principle
Infinite baffle for large and varying air 
volumes. Directed Sound Field Geometry

for optimum phase and frequency response

Recommended Amplifier Power
Ten to One Hundred Fifty Watts per
Channel

Nominal Impedance
8 Ohms

Frequency Response
45 Hz to 21,000 Hz, plus or minus 3 dB
(on axis)

Sensitivity
90 decibels for 2.83 volts of Pink Noise,
measured at 1 meter on axis

Overall Exterior Frame Dimensions
8-1/4” x 14-1/2”

Depth Behind Wall
2-5/8” (Assumes 1/2” drywall)

Wall Cut-Out Dimensions
7-1/8” x 13-1/4”

Wiring Requirements 
We recommend 16 to 18 gauge for up to
80 feet, 14 gauge for up to two hundred
feet. Connectors accommodate 12 to 22
gauge wire.

21

Specifications

Limited Warranty 

Niles Audio Corporation ("NILES") warrants its loudspeaker products to the original purchaser
to be free of manufacturing defects in material and workmanship for a period of two years
from date of purchase.

This Warranty is subject to the following additional conditions and limitations. The Warranty
is void and inapplicable if NILES deems that the product has been used or handled other than
in accordance with the instructions provided by the manufacturer, including but not limited to
damage caused by accident, mishandling, improper installation, abuse, negligence, or normal
wear and tear, or any defect caused by repair to the product by anyone other than NILES or an
authorized NILES dealer.

To obtain warranty service, take the unit to the nearest authorized NILES dealer, who will test
the product and if necessary, forward it to NILES for service. If there are no authorized NILES
dealers in your area, you must write to NILES and include your name, address, model and 
serial number of your unit, along with a brief description of the problem.  A factory Return
Authorization Number will be sent to you. DO NOT RETURN ANY UNIT WITHOUT FIRST
RECEIVING WRITTEN AUTHORIZATION AND SHIPPING INSTRUCTIONS FROM NILES.

If the above conditions are met, the purchaser's sole remedy shall be to return the product to
NILES, in which case NILES will repair or replace, at its sole option, the defective product
without charge for parts or labor. NILES will return a unit repaired or replaced under warranty
by shipping same by its usual shipping method from the factory (only) at its expense within the
United States of America. THERE ARE NO OTHER WARRANTIES, INCLUDING WITHOUT
LIMITATION, EITHER EXPRESS OR IMPLIED WARRANTIES OF MERCHANTABILITY OR FIT-
NESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE PRODUCT. 

REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE
REMEDY OF THE CONSUMER/PURCHASER.  NILES SHALL NOT BE RESPONSIBLE FOR
ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES EXCEPT TO THE EXTENT PROVIDED
(OR PROHIBITED) BY APPLICABLE LAW. 

Some states do not allow the exclusion or limitation of incidental or consequential damages,
so the above limitation may not apply to you.  This warranty gives you specific legal rights,
and you may also have other rights which vary from state to state.

For the name of your nearest authorized NILES dealer contact: 

NILES AUDIO CORPORATION
P.O. BOX 160818, Miami, Florida 33116-0818.

Please fill in your product information and retain for your records.

Model_________

___________________________________________________________________________   

Serial No._____

____________________________________________________________________________   

Purchase Date____

_________________________________________________________________________   

22

Limit
ed W

arr
anty 

Summary of Contents for HD-CTR













Reviews: