background image

5

4

WWW.NILESAUDIO.COM

NILES AUDIO

 – 1-800-BUY-HIFI – 1-760-710-0992

INSTALLATION CONSIdERATIONS 

continueD

 NOTE: bE VEry carEful whEN lOcaTiNg ThE spEakErs. VErify all lOcaTiONs arE 
clEar Of ObsTrucTiONs bEfOrE cuTTiNg ThE firsT hOlE. 

Each speaker requires two-conductor wiring of suffi cient gauge. The gauge 
depends on the length of the wire. For recommendations, please refer to (

Figure 2

). 

(Stereo Input loudspeakers require four-conductor wiring).

When running loudspeaker wire inside walls or ceilings, use special jacketed 
cable (CL-2 or CL-3 rating) to protect the wire and for fi re prevention. In some 
municipalities, conduit is required. For a trouble-free installation, low voltage wire 
such as loudspeaker wire must be in accordance with the National Electrical Code 
and any applicable provisions of the local building code. If you are unsure of the 
correct installation techniques, wire jacket, or type of conduit to use, consult a 
professional audio/video installer, building contractor, or the local building and 
inspection department.

Distance from speaker to amplifier

wire gauge

Less than 80 feet

16

80 to 200 feet

14

More than 200 feet

12

PARTS GUIdE

PACKAGE CONTENTS FOR: 

CM7SD

 (1) Niles CM loudspeaker, (1) Magnetically attached round grill, (1) Hole template 
with painting standoffs, (1) Owner’s manual, (1) Warranty card.

INSTALLATION CONSIdERATIONS

Recommended tools for installation:

The CM7SD requires an 8-1/2” 
(21.6 cm) diameter hole opening 
and a minimum of 2-3/4” (7.0 cm) 
depth when measured from the 
exterior face of the drywall. To the 
sides of the hole you will need 1” 
(2.54 cm) for the mounting tabs to 
clamp the speaker to the drywall.

(cONTiNuED ON NExT pagE)

• Cordless screwdriver

• Measuring tape

• Painters tape

• One inch #2 Phillips tip

• Stud fi nder

• Drop cloth

• 1/8” Drill bit

• Spackle

•  Optional - a 24” x 24” 

piece of R19 insulation

• Drywall saw

• Wire stripper

• Laser plumb bob

• Cable ties

• 12” -14” Coat hanger wire

• Pencil

Figure 2. 

Speaker Wire Gauge Guide

Figure 1. 

Required dimensions for installation in ceiling.

2-3/4" (7.0 cm)

Depth from Drywall

Exterior

CM7SD 8-1/2” (21.6 cm)
Diameter Hole Opening

9901204-RevA-CM7SD-SpkManual-V3.indd   4-5

8/17/11   8:23 PM

Reviews: