8
NILES AUDIO
– 1-800-BUY-HIFI – 1-760-710-0992
SWITCH ADJUSTMENTS
TREBLE SWITCH
(PR AND HD MODELS)
The three-position tweeter switch allows you to adjust the high frequency output
of the loudspeaker to compensate for room acoustics. The center position,
marked 0, does not affect the tweeter’s output. Moving the switch to the
–
position reduces the tweeter output by 3 dB to compensate for bright rooms
(tile or wood floors, sparse furnishing, tall ceilings). Moving the switch to the
+
position increases the tweeter output by 3 dB to compensate for absorptive
rooms (carpeting, lots of drapery, plush furniture, etc.).
DIFFUSE / DIRECT SWITCH
(CM7FX)
6TFUIF%JGGVTFTFUUJOHGPSNPWJFTBOEHFOFSBMNVTJDMJTUFOJOHTJODFNPTUàMNT
are mixed using non-localized surround effects and music is usually recorded in a
GBWPSBCMFBDPVTUJDFOWJSPONFOU6TFUIF%JSFDUTFUUJOHGPSEJTDSFUFNVMUJDIBOOFM
recordings that equally emphasize front and surround sounds. For 7.1-channel
TVSSPVOETPVOETZTUFNTVTFUIF%JGGVTFTFUUJOHPOUIFTJEFFGGFDUTMPVETQFBLFST
BOEUIF%JSFDUTFUUJOHGPSUIFSFBSFGGFDUTMPVETQFBLFST
PAINTING THE GRILLES
The CM loudspeaker grilles can be painted without priming, but the fabric scrim
must first be removed. The installation template has die cut standoffs that can be
used to position the grille off the ground while painting. Use several light coats
sprayed from different sides and angles to cover all surfaces and not fill in any
holes. If you do fill some holes, use compressed air to open them before the paint
dries. It may be helpful to slightly dilute the paint to prevent it from clogging the
grille holes.
INSTALLING THE GRILLES
The Niles MicroThin™ speaker grille installs magnetically over the speaker.
Carefully center the grill over the speaker and let the magnets do their work,
verifying that the grill sets flush against the ceiling at all edges.
Summary of Contents for CM7BG
Page 15: ......
Page 17: ...LIMITED WARRANTY CARD...
