ANTENNAS AND CABLES SETTING UP
Outdoor antenna installation
Mount out-of-car antenna in the car trunk with the help of two screws.
Cable layout and connector assembly
1. Keep the type, specifications, routing direction, location and curvature radius of cables in
compliance with the model requirements. Place cables in correct order, bend them smoothly, and
protect the surface from any damage.
2. Place RF cables separately from power cables. Take proper isolation measures if they have to be
placed on the same cable racks owing to the site condition restrictions.
3. Fasten all connection parts of the whole system in correct order, from the antenna to repeater
interfaces, and make sure that the electrical interfaces are well contacted. Give waterproof
treatment to outdoor connection parts.
4. Take lightning protection measures for the antenna and feeder system in accordance with the
system requirements. Avoid deforming the antenna feeder where grounding clips are placed, and
give waterproof treatment to the feeder.
Indoor antenna installation
1. Find a suitable position for an in-car antenna (e.g. under the seat of a driver).
2. Clear and dry the place where you’re going to fix the in-car antenna. Put up the nylon strap tightly
on the chosen position and stick the device firmly.
3. Plug in the in-car antenna into the in-car antenna interface of the signal booster and fasten it
tightly.
