Five Band repeater display and operation interface
The booster is a 5 band device that supports 5 different kinds of signal:
LTE 800, GSM 900, DCS 1800, WCDMA 2100, LTE 2600.
1.
The1
st
line
shows the output signal strength. 5 bars appearing next to the signal strength indicator signify the
maximum output power of the repeater.
One signal bar is 5 dB.
2. The input signal strength measured in
dBm
.
3. Indicates the frequency band of the mobile system; All signal readings correspond to the current frequency
band. Since the booster amplifies several bands simultaneously, the frequency band and its readings will
change every few seconds.
4.
Antenna Isolation Detection
. After switching on the repeater for the first time, it will automatically detect the
oscillation between the outdoor and indoor antennas.
5.
Uplink Sleep Mode
. The uplink of the repeater is in standby mode when there is no call or data transmission.
It will be activated immediately when a call or a data exchange session are initiated.
6.
UL maximum gain
.
7.
DL maximum gain
.
8. Press
“Enter”
to select or confirm the settings.
9.
Back
to the previous page or to cancel the settings.
10.
Increase
the gain.
11.
Decrease
the gain.
12.
Smart
The repeater can set the gain automatically to prevent the alarm.
Summary of Contents for NS-300-Smart
Page 7: ......
