background image

3. MODEL DESCRIPTION

Nikrans NS-150 amplifier improves GSM and EDGE/GPRS signals in areas with low or poor network coverage. We all
understand how challenging it can become to suffer from connectivity issues in and around remote areas. With this

booster, you will always have high quality mobile communication at any place with coverage shortage. The GSM
booster for house NS-150 covers about 150 m

2

(1600ft

2

), so it is mainly meant for small houses, offices, flats, studios,

etc. This cell amplifier works at 900 MHz frequency which is prevailed by the operators for deploying GSM network.

GSM signal booster is efficient in stabilising your voice connection. With this booster, you will no longer have to worry
about calls that don't go through or are constantly interrupted. Some network providers operate at the same
frequency of 900 MHz for 3G high speed Internet simultaneously. Confirm this with your network operator first and
then buy the Nikrans NS-150 amplifier to boost GSM calls and, as a pleasant bonus, to improve 3G internet connection.

Nikrans NS-150 GSM is designed taking into consideration the latest technical and modern standards and is compliant

with CE and RoHS.

Order this smartphone signal repeater now and enjoy uninterrupted phone calls and high speed 3G Internet
connection!

Summary of Contents for NS-150























Reviews: