1. Shows the UL&DL average frequency.
2. Shows the UL&DL maximum gain.
3. Smart function. The repeater could set the gain automatically to prevent the Alarm.
4. Antenna Isolation Detection. At first power on the repeater, it will detect the oscillation automatically
between the outdoor and indoor antennas.
5. ALC Alarm indicator.
6. 5 bars of the output signal strength indication, which shows the maximum output power of the repeater. Each
signal bar represents 5dB.
7. Press to select or confirm the settings.
8. Increase the gain or upward adjusting of the average frequency. Decrease the gain or downward adjusting of
the average frequency.
9. Smart key. Press the key enter into Smart function.
The repeater has Manual Gain Control (MGC) feature that enables engineers to reduce the gain of the repeater
manually via touch screen if oscillation is detected. Users could also use the “Smart” function as well, which will help
to set to the suitable gain automatically without any interference to the mobile network.
In order to maintain safe and specific output signal levels, this repeater has built-in signal oscillation detection circuit
to adjust the gain automatically so as to avoid interference to the cellular network, also it gets color changing LED
indicating its environmental status: the Alarm LED will change color from green to orange or red, (depending on the
Summary of Contents for NS-150-Multi
Page 7: ......
