ANTENNAS AND CABLES SETTING UP
Outdoor antenna installation
Mount out-of-car antenna onto the car trunk fixing it on a magnetic antenna's surface.
Cable layout and connector assembly
1. Keep the type, specifications, routing direction, location and curvature radius of cables in compliance with the model
requirements. Place cables in correct order, bend them smoothly, and protect the surface from any damage.
2. Place RF cables separately from power cables. Take proper isolation measures if they have to be placed on the same
cable racks owing to the site condition restrictions.
3. Fasten all connection parts of the whole system in correct order, from the antenna to repeater interfaces, and make sure
that the electrical interfaces are well contacted. Give waterproof treatment to outdoor connection parts.
4. Take lightning protection measures for the antenna and feeder system in accordance with the system requirements.
Avoid deforming the antenna feeder where grounding clips are placed, and give waterproof treatment to the feeder.
Indoor antenna installation
1. Find a suitable position for an in-car antenna (e.g. under the seat of a driver).
2. Clear and dry the place where you’re going to fix the in-car antenna. Put up the nylon strap tightly on the chosen
position and stick the antenna firmly.
3. Plug in the in-car antenna into the booster interface and fasten it tightly.
