Repeater Settings
Indicator Light Instructions
• There are 5 indicator lights: PWR (power), ALM (alarm), three signal strength indicators.
• Power light is always on (green).
• ALM light is red. When the booster works normally, this light is off, when the booster suffers from self-oscillation or input
signal is too strong, this light is flicking. In this case the power turns off automatically and restarts after 30seconds. After
repeating 5 times, the light turns on again, and it will restart after 1 hour. If the problem still exists, the light will be
flicking again.
• There are totally 3 signal strength indicators, they indicate signal strength as: 0dBm, 5dBm, +10dBm, no matter of what
frequency is the signal that reaches the booster, that light will be on. The light colors are yellow (0dBm), green (5dBm),
blue (10dBm).
Troubleshooting
• When the ALM light is flicking or on, and the booster has self-oscillation issue, it indicates the wrong installation of
indoor and outdoor antenna. In this case, please, read antenna installation instructions again and re-install the
antennas.
• When the ALM light is flicking or on, and the input signal is too strong, please, change the direction or place of your
outdoor antenna.
Questions & Solutions
