DOWN Button
: Go to the next page to check the functioning status of the device or see the error description.
Questions & Solutions
If the device detects that the incoming signal is weak, try 3 possible solutions:
• Solution 1. Direct the outdoor antenna to provider’s nearest base station.
• Solution 2. Change the position of the outdoor antenna. Try to put it as high as possible.
• Solution 3. Reinstall the outdoor antenna trying to avoid obstacles between the antenna and provider’s base
station.
If the device detects that the outdoor antenna is too close to the indoor, change the position of either or both
antennas to avoid self-oscillation. Mount them at least 15m one from another.
If the device detects self-oscillation between the antennas and says that the system is being adjusted, it means that
the system has detected the problem of bad isolation between the antennas and AGC is adjusting the system gain
automatically to make the device work correctly. No actions are required from you.
Summary of Contents for LCD-1200
Page 7: ......
