Max Gain –
The booster’s highest gain that is set by the factory.
Working Gain
– The current gain measured while the booster is working under different conditions. When
the Input signal is weak, the booster will work with at the max gain, but when the device detects too much
strong input signal, it will automatically reduce the gain to avoid self-oscillation of the system.
Reduced Gain –
This value indicates how much the gain has been reduced according to the input signal
strength.
This message means that the outdoor signal detected by the booster is not good enough.
Solution 1.
Check if the external antenna is connected firmly to the BS port. Make sure the external cable
is not damaged.
Solution 2.
Direct the external antenna to provider’s nearest base station.
Solution 3.
Change the
position of the external antenna. Try to put it as high as possible.
Solution 4.
Check and make sure the booster you installed matches the frequency bands that your
mobile provider(s) operates in your area.
Summary of Contents for BD-300GDW
Page 7: ......
