10
You can add a battery.
1
Insert the battery to the additional battery
case.
•
With the positive and negative terminals oriented
correctly, insert the battery until the latch holds it firmly
in place.
•
Be careful not to wet or touch the power terminal as it
may cause a malfunction.
2
Insert the additional battery into the
additional battery case storage unit of the
waterproof case.
•
If you wet or touch the battery pin frame, it may cause a
malfunction.
•
To remove the battery, pull the latch outward and push
up through the opening on the bottom of the
additional battery case.
C
Recording in high-temperature conditions
•
Recording may stop if the camera becomes hot when using it in high-temperature
conditions, even if the battery is sufficiently charged.
The waterproof performance of the WP-AA1 Waterproof Case is equivalent to JIS/IEC
waterproof class 8 (IPX8). It is confirmed that water will not enter the waterproof case
if held underwater at depths up to 40 m for up to 30 minutes.
•
Nikon will not be held liable for any errors this manual may contain.
•
The appearance of this product and its specifications are subject to change
without notice.
Adding a battery
Specifications
Maximum water depth
40 m (131 ft)
Camera operating
temperature
-10°C– +40°C (14°F–104°F) (for land use), 0°C–40°C (32°F–
104°F) (for underwater use)
Dimensions (W x H x D)
Approx. 90.2 × 80.3 × 48.8 mm (3.6 × 3.2 × 2.0 in.)
(excluding projections)
Weight
Approx. 133 g (4.7 oz) (excluding battery and camera)
Latch
Battery pin frame
