Nikon Scan, User Manual

Page: 16 / 57

- 16 -
4. Scanning Conditions
Except where otherwise noted, the operating procedures
covered in the present chapter are identical for all scanners
supported by Nikon Scan. Features specific to each model are
covered in
Appendix A , Features Specific to the LS-20 and
LS-1000, Appendix B , Features Specific to the LS-4500AF, and
Appendix C , Features Specific to the AX-110 and AX-210.
4.1 Choosing the Scanner
The names and SCSI IDs of the connected scanners are shown
in the menu at the top left corner of the Main dialog box.
Nikon Scan will automatically detect which scanners are
connected and will display the Main dialog items and menus
appropriate for the scanner you select. The Main dialog box
items will vary slightly, depending on the selected scanner.
If multiple Nikon scanners are connected and powered on, first
choose the scanner you are going to use from the pop-up
menu at the top left corner of the Main dialog box. Only
scanners supported by Nikon Scan will be visible in this pop-up
menu.
Note: Depending on what devices are actually connected to your
computer, the options which will appear in the pop-up menu above
may differ from those shown here.