Nikon Scan User Manual Download

Page: 48 / 57

- 48 -

Appendix A: Features Specific to the

LS-20 and LS-1000

Except that the LS-20 does not support the optional SF-100
Auto Slide Feeder, the operating procedures for the LS-20 and
LS-1000 are identical. The following section describes features
specific to the LS-20 and LS-1000.

A.1 Software Interpolation

Software Interpolation is used to provide precise image scaling
and resolution.

The pop-up menu at the top left corner of the Main dialog box
includes the

Special Capabilities

sub-menu. Choose

Software

Interpolation

from the

Special Capabilities

menu.

You can choose any one of the following from the

Software

Interpolation

menu.

Bilinear:

Interpolation with emphasis on accuracy

Nearest Neighbor:

Interpolation with emphasis on high-speed
processing

None:

No interpolation is performed

Summary of Contents for Scan


























































Search results

Summary of Contents for Scan

Reviews:

Related manuals for Scan

Brands by name

Popular brands

Nikon Scan, User Manual

Search results

Summary of Contents for Scan

Reviews:

Related manuals for Scan

Brands by name

Popular brands