Nikon SB-500 User Manual Download Page 68

Page: 68 / 96

Tips on Speedlight Care and Reference Information

This section explains troubleshooting, Speedlight care, specifications
and optional accessories.

Troubleshooting

If the flash-ready indicator flashes slowly, or any trouble occurs, use
the following chart to determine the cause of the problem before
taking the Speedlight to a retailer or Nikon-authorized service
representative for repair.

Problems with the SB-500

Problem Cause

Solution

The power
cannot be
turned on.

The batteries are not
correctly installed.

Insert the batteries
correctly.

B-9

Battery power is weak.

Replace the batteries.

B-11

The flash-ready
indicator does
not light up.

The standby function is
activated.

• Press the camera

shutter-release button
halfway.

•

Set the SB-500’s power
switch to any mode
other than [OFF].

• Press the SB-500’s test

firing button.

F-8

Battery power is weak.

Replace the batteries.

B-11

The power switch is set
to [

• Normal operation
• The flash-ready

indicator does not flash
when the LED light is
in operation, except for
warning indications.

—

Tips on Speedlight Care and Reference Information

Summary of Contents for SB-500

































































































Search results

Summary of Contents for SB-500

Reviews:

Related manuals for SB-500

Brands by name

Popular brands

Nikon SB-500, User Manual

Search results

Summary of Contents for SB-500

Reviews:

Related manuals for SB-500

Brands by name

Popular brands