Nikon PD-10, Instruction Manual

Page: 15 / 120

9
En
LED Lamp Display
The POWER, LINK and BUSY lamps (
c
3) indicate the following after the printer and camera are set up.
During printing standby, each lamp displays the color corresponding to the check mark (
9
).
Note
• If the connection with the camera is not established (when the BUSY lamp is not lit) and no operations are performed for about three minutes,
the PD-10 automatically turns off in order to reduce power consumption.
• If in printing standby (indicated by the check marks in the chart above) for 10 minutes, the PD-10 automatically turns off.
Lamp Display Status Printing standby
POWER Lights Power is on
9
LINK Lights in yellow green Ready for wireless connection
9
Lights in orange Not ready for wireless connection
Blinks rapidly in orange for about 3 seconds There is a problem with the wireless connection.
BUSY Lights in yellow green Printing standby
9
Blinks in yellow green Transferring data for printing
Blinks rapidly in yellow green for about 3 sec-
onds There is a problem transferring data for printing.
Blinks in orange Setting Profile Information on the camera
Lights in orange for about 3 seconds Profile Information setup on the camera complete
Blinks rapidly in orange for about 3 seconds There is a problem setting Profile Information on the camera.
Blinks alternately in orange and yellow green Resetting (
c
10)