74
Troubleshooting
The battery
inserted in the
camera cannot be
charged.
•
Confirm all connections.
•
When connected to a computer, the camera may not
charge for any of the reasons described below.
-
Off
is selected for
Camera settings
M
Charge by
computer
in the setup menu.
- Battery charging stops if the camera is turned off.
- Battery charging is not possible if the camera’s display
language and date and time have not been set, or the
date and time were reset after the built-in rechargeable
battery was exhausted. Use the Charging AC Adapter to
charge the battery.
- Battery charging may stop when the computer enters
sleep mode.
- Depending on the computer specifications, settings,
and status, battery charging may not be possible.
–
12
–
–
The monitor is
hard to see.
•
The surrounding area is too bright.
- Move to a darker place.
•
Adjust the screen brightness.
•
Change the background color of the screen.
–
O
flashes on the
screen.
•
If the camera clock has not been set,
O
flashes on the
shooting screen, and images and movies saved before the
clock is set are dated “00/00/0000 00:00” and “01/01/2016
00:00” respectively. Set the correct time and date for
Camera settings
M
Date and time
in the setup menu.
•
The camera clock is not as accurate as ordinary watches or
clocks. Periodically compare the time of the camera clock
with that of a more accurate timepiece and reset as
required.
Date and time of
recording are not
correct.
No information
displayed on the
screen.
Camera settings
M
Monitor settings
M
Photo info
in
the setup menu is set to
Hide info
.
Screen for setting
date and time is
displayed when
the camera is
turned on.
The built-in rechargeable battery is exhausted; all settings
were restored to their default values. Configure the camera
settings again.
–
The camera
settings reset.
Problem
Cause/Solution
A
