2
Nikon
IX240 Film Adapter IA-20 Reference Manual
Cautions
•
The reproduction of this manual in whole or in part is prohibited save in cases
in which Nikon’s prior permission has been obtained.
•
The information contained in this manual is subject to change without notice.
•
Nikon has made every effort to produce a perfect manual, but should you find
any mistakes, we would be grateful if you would kindly let us know. The
address of the Nikon representative in your area is provided separately.
•
Nikon is not liable for damages resulting from the use of this product.
Trademark Information
All trade-names mentioned in this manual are the trademarks or registered trademarks of
their respective holders.
Symbol
The
symbols in this manual signify important safety precautions. All pas-
sages marked with this indication should be read prior to installation to prevent
injury to yourself or to others. These indications are also placed in the table of
contents to mark passages that should be read before use.
✔
Symbol
The
✔
symbols in this manual signify the need for caution when using the
products. These indications are placed in sections that should be read before
operation to prevent damage to the product.
Federal Communications Commission (FCC) Radio Frequency
Interference Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installa-
tion. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be deter-
mined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
