Load Film
BASIC OPERATION
18
19
3
3.
1
3.
2
3.
3
i
Only DX-coded film can be used with this camera. When film other than
DX-coded film is inserted,
T
blinks and
fl
appears on the LCD panel.
i
Shutter curtains are very thin. Make sure not to touch the shutter
curtains with your finger or film leader.
i
Film load can be confirmed on the LCD panel.
i
When changing film outdoors, avoid direct sunlight.
y
Check points
Use a DX-coded film. Film speed
is set automatically (ISO25-
5000).
When the camera is turned on,
film is loaded and the camera
back is closed, the film automat-
ically advances to the first frame.
Turn on the main switch, then open the camera back
and insert film.
• Insert from the bottom of the film cartridge.
• Do not insert the film leader beyond the red index mark.
• Hold the film cartridge and ensure film is properly positioned with no
slack.
Pull film leader out to red index mark.
• When
T
and
1
appear on the LCD panel, the film has advanced to the first
frame.
• When
‹
and
T
blink on the LCD panel, film is not properly installed.
Open the camera back again and reload film.
• Film is automatically rewound when the film reaches the end of the roll.
(See page 27.)
• Number of available exposures of the film roll can be checked through the
film cartridge confirmation window.
Gently close the camera back until the lock release
snaps closed. Film automatically advances to first
frame.
ISO (film
speed)
DX mark
NOTE: Loading/removing film
Shutter curtains are very thin. Make sure
not to touch the shutter curtains with
your finger or film leader.
F60 (E) 02.12.27 5:34 PM Page 18
WWW.LENSINC.NET
