To modify exposure control (i.e. from the ISO standard), use the Exposure
Compensation function. This can be useful when intentionally achieving under-
or overexposure to obtain a specific photographic effect. This camera offers
compensation of –2 EV to +2 EV in 1/2 steps.
• Exposure Compensation can be set in
P
,
S
,
A
and Vari-Program.
Compensate to the + side to brighten, and the – side to darken overall picture to obtain
specific photographic effect.
Tip
64
ADV
ANCED OPERA
TION
Exposure Compensation
1
Set Exposure Compensation by
rotating the Command Dial while
pressing the
∆
button until the
desired compensation value
appears (–2 EV to +2 EV in 1/2
steps).
• When the Exposure Compensation is set,
=
appears in the LCD panel and viewfinder.
• The compensation value can be checked by
pressing the
∆
button. The electronic
analogue exposure display also appears as
illustrated in the viewfinder when the
∆
button
is pressed.
Electronic analogue exposure
display
No compensation
+0.5 EV compensation
–0.5 EV compensation
Over +1.0 EV compensation
Under –1.0 EV compensation
NOTE: Setting Exposure Compensation
Normally, you should compensate exposure to the + side when the background is
brighter than your main subject, or to the – side when the background is darker.
2
Compose picture, confirm focus
indicator
/
and shoot.
• To cancel Exposure Compensation, rotate the
Command Dial while pressing the
∆
button to
reset the compensation value to
0.0
. In Vari-
Program, changing the exposure mode also
cancels the Exposure Compensation. (Turning
the power switch off does not cancel the
Exposure Compensation.)
65
Check points
• The Exposure Compensation cannot be set in
a
or
M
exposure mode.
• Once the Exposure Compensation is set in each
P
,
S
or
A
exposure mode,
compensation remains in that exposure mode. Changing the exposure mode to
M
,
a
or Vari-Program temporarily cancels the compensation.
• Exposure Compensation set in Vari-Program is cancelled when exposure mode is
changed.
• If the exposure compensation is set when the built-in Speedlight is used, the flash
output level is also compensated.
F55 (E) 03.4.15 7:52 PM Page 64