17
MOUNTING LENS
1
Remove camera body cap and front
and rear lens caps.
2
Position lens in the camera’s bayo-
net mount so that the mounting
indexes on lens and camera body are
aligned. Taking care not to press the lens
release button, twist lens counterclock-
wise until it locks into place.
• When mounting/removing lens,
make sure that the camera’s
power is turned off and avoid direct
sunlight.
• For Nikon lens compatibility, see
pages 128-131.
• To mount non-AI lens, see page
132.
Some non-AI lens cannot be
attached. For more details, see
page 131.
G-type Nikkor and other CPU Nikkor lens
• The G-type Nikkor lens has no aperture ring; aperture should be selected from
camera body. Unlike other CPU Nikkor lenses, aperture does not need to be set
to minimum (largest f-number).
• CPU Nikkor lenses other than G-type Nikkor lens have an aperture ring. Set the
lens aperture to its minimum and lock. When the lens is not set to its minimum
aperture setting and the power switch is turned on in Programmed Auto or
Shutter-Priority Auto exposure mode,
ƒEE
blinks in the LCD panel and
viewfinder.
P400 (E) 02.12.27 6:42 PM Page 17
