5
1
System Configuration
See Chapter 2, Assembly, for instructions on assembling the DXM1200C system.
Camera
Interface
board
Interface
cable
PC
Use a PC that meets the following requirements. The performance of the camera varies
depending on the performance of the PC.
Because of a compatibility problem, the system might not work correctly with some PCs.
So, please use the Nikon recommended PC as much as possible. For the Nikon
recommended PC, contact your nearest Nikon representative.
Hardware and Software Requirements
CPU:
Pentium 4 2 GHz or faster
RAM:
256 MB or greater memory space required
Hard disk:
100 MB or greater memory space required
Mother board:
PCI expansion slot space required
VRAM:
16 MB or greater memory space required
OS:
Windows 2000/XP (Japanese/English ver.)
Note) Be sure to use one of the following:
Windows 2000 (Japanese /English/Simplified Chinese ver.):
Windows 2000 professional Service Pack 4 or later
Windows XP (Japanese /English/Simplified Chinese ver.):
Windows XP Professional Service Pack 2 or later
Note) When a SCSI controller board is installed into the PC, the
DXM1200C may not work correctly. In that case, remove the
SCSI controller board from the PC.
Display monitor: Minimum resolution and colors are 1024 x 768 pixels and 16.7
million colors.
Recommended resolution and colors are 1280 x 1024 pixels or
more and 16.7 million colors or more.
Microscope
C-mount adapter (optional)
The following C-mount adapters are available from Nikon.
• C-mount direct TV adapter
• 1X relay lens for ECLIPSE C-mount TV adapter
• C-mount TV adapter 0.6X
• C-0.7X DXM relay lens
(If your microscope is not manufactured by Nikon, please consult the dealer from which
you have purchased the microscope.)
Caution
The interface board and camera of DXM1200C are
incompatible with those of DXM1200 and DXM1200F.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
