Nikon DTM-302 Series, Instruction Manual, Page: 36 / 222

2 Preparation
18 Total Station DTM-302 Series Instruction Manual
d.
If the target image does move, rotate the telescope focusing ring. Then repeat
from Step c.
Setting Up the Prism Reflector
2.1
1. Assemble the prism reflector as shown in Figure 2.1.
Figure 2.1 Assembling the prism reflector
2.
Adjust the height of the tribrach adaptor (see page 19).
3.
If necessary, change the direction of the prism (see page 19).
4.
Set the prism constant (see page 19).
5.
If you are using a single prism holder, set the position of the target plate (see
page 20).
Detailed instructions for Step 2 through Step 5 are provided on the following pages.
Tribrach adapter 13/14
Leveling base W10/W11
Tripod
Target plate for single prism
Tiltable single
prism holder
Prism C
Target pole
Triple prism holder