Nikon DS-Fi1 Instructions Manual Download Page 43

Page: 43 / 49

Chapter 8 Troubleshooting

4 Camera Settings on the PC

- 35 -

Camera Settings on the PC

Trouble Checkpoints

Unable to control

camera functions. (Or

incorrect settings

result.)

•

Check that the specified device driver is installed on the PC.

The specified device driver can be found on the supplied CD-ROM.

•

Check that the application software in use is compatible with the DS-U3.

•

Check that the DS-U3 and the PC are connected with the IEEE1394b

cable.

•

Check that the cable used is IEEE1394-compliant. For shielded twisted

pair cables, the cable connecting devices must be 4.5 m maximum.

•

Check that the version of the OS is appropriate for the product. The

product is not compatible with the Macintosh.

Applicable OS: Windows 7 Professional, Windows XP Professional

Service Pack 2 (SP2)

Noise is heard from the

Camera Head (DS-Ri1)

•

If you obtain a high-resolution image by pixel-shifting on DS-Ri1, noise

may be heard from the movable part of the Camera Head. However, this

is not a problem.

Adjusting

the

white

balance gain setting

seems to have no

effect on the image.

•

If you are using the GainUp mode (X 16) for DS-Ri1, be sure that the

white balance gain is set to below 4. Setting the parameter to 4 or higher

is invalid due to the hardware limitation.

Summary of Contents for DS-Fi1


















































Search results

Summary of Contents for DS-Fi1

Reviews:

Related manuals for DS-Fi1

Brands by name

Popular brands

Nikon DS-Fi1, Instructions Manual

Search results

Summary of Contents for DS-Fi1

Reviews:

Related manuals for DS-Fi1

Brands by name

Popular brands