432
n
Caring for the Camera
Storage
When the camera will not be used for an extended period, remove
the battery and store it in a cool, dry area with the terminal cover in
place. To prevent mold or mildew, store the camera in a dry, well-
ventilated area. Do not store your camera with naphtha or
camphor moth balls or in locations that:
• are poorly ventilated or subject to humidities of over 60%
• are next to equipment that produces strong electromagnetic
fields, such as televisions or radios
• are exposed to temperatures above 50 °C (122 °F) or below
–10 °C (14 °F)
Cleaning
Do not use alcohol, thinner, or other volatile chemicals.
Camera body
Use a blower to remove dust and lint, then wipe gently with
a soft, dry cloth. After using the camera at the beach or
seaside, wipe off sand or salt with a cloth lightly dampened in
distilled water and dry thoroughly.
Important
:
Dust or other
foreign matter inside the camera may cause damage not
covered under warranty
.
Lens, mirror,
and
viewfinder
These glass elements are easily damaged. Remove dust and
lint with a blower. If using an aerosol blower, keep the can
vertical to prevent the discharge of liquid. To remove
fingerprints and other stains, apply a small amount of lens
cleaner to a soft cloth and clean with care.
Monitor
Remove dust and lint with a blower. When removing
fingerprints and other stains, wipe the surface lightly with a
soft cloth or chamois leather. Do not apply pressure, as this
could result in damage or malfunction.
