23
En
Es
Fr
De
It
Sv
Nl
Ru
Pl
Fi
No
Dk
Cz
Ro
Hu
Pb
Troubleshooting/Repair
If this product fails to function as expected, check the list below before consulting your local dealer or the
store where you purchased it.
l
If there is a problem with the product.
Problem
Cause/Solution
•
Does not turn on
•
Press the PWR button (top of the body).
•
Check that the battery is inserted correctly.
•
Replace the battery with a new one.
•
Unable to measure
•
Anomalous result
•
Confirm the settings.
•
Confirm if it can measure a large target close to you (example: a building
approx. 15 m/yd. ahead of you).
•
Clean the lens surface if necessary.
•
Cannot see the internal display
•
Difficult to see the internal display
•
Check the brightness of the internal display, and adjust it as necessary.
Cover the objective lens so that checking the internal display is easier.
•
Do not know if STABILIZED
function is working
•
Compare the vibration of the target in the viewfinder when the Laser
Rangefinder is ON and OFF.
•
While the Laser Rangefinder is ON, the STABILIZED function is always
activated.
•
Cannot turn off the STABILIZED
function
•
The STABILIZED function is activated concurrently when the Laser
Rangefinder is ON. When the Laser Rangefinder is OFF, the STABILIZED
function automatically turns off.
•
The STABILIZED function cannot be turned on or off manually.
•
There are minute motion
sounds when the power turns
on and off
•
Due to the STABILIZED system motor, minute motion sounds occur.
These sounds are normal, please continue to use the Laser Rangefinder.
•
[ ] is displayed in the internal
display
•
Failure indication. Please contact your local dealer or the store where you
purchased the product.
Summary of Contents for CoolShot Pro Stabilized
Page 355: ...Memo ...
