47
A
n
ti-s
h
ake
M
o
d
e
Anti-shake Mode
Shooting in Anti-shake Mode
Anti-shake mode offers the following features:
• This mode reduces effects of camera shake or blurred subjects, and pro-
duces clear images.
• [Electronic VR] (
c
104) and [BSS] (best shot selector) are enabled. Elec-
tronic VR compensates blurred images. BSS is on, camera takes shots to a
maximum of ten, they are compared and sharpest picture (picture with
highest level of detail) is saved (
c
102).
• The higher sensitivity is set and the shutter speed will be faster than in
L
(auto) mode.
• Flash mode and self-timer are set to off.
1
Press
d
(
F
) (anti-shake).
The camera enters anti-shake mode. Press again to
return to the shooting mode selected with the mode-
selection menu.
2
Frame the subject and take the
picture.
When vibration is detected during shooting,
automatic compensation is activated.
When compensation is complete, new copy
is stored. The
L
icon (
c
6) for the new
copy is displayed when played back.
j
Notes on Anti-shake Mode
• Shutter speed is limited to a certain value for dark subjects.
• Use of the high-sensitivity mode (
c
34) is recommended for shooting subjects in dark
places.
• Pictures taken in this mode may become somewhat grainy.
• Even if [Date imprint] (
c
119) is enabled, the date will not be imprinted.
l
Image Mode and Exposure Compensation in Anti-shake Mode
When
m
is pressed in anti-shake mode, the menu is displayed to enable set the image
mode (
c
95) or exposure compensation (
c
99). Settings made for exposure compensation
are reset when the camera is switched to another mode.
88
M
M
W
W
B
B
