Nikon COOLPIX A100, Reference Manual

Page: 99 / 143

83
Us
in
g
M
e
n
u
s
Electronic VR
Choose whether or not to use electronic VR (vibration reduction), which
reduces the effects of camera shake during shooting.
B
Notes About Electronic Vibration Reduction
•
The effectiveness of electronic vibration reduction decreases as camera shake
increases.
•
The image captured using electronic vibration reduction may contain noise.
•
Electronic vibration reduction does not function under the following conditions or
in the following shooting modes:
- When slow sync with red-eye reduction (
A
36) is used.
- When exposure exceeds a certain length of time.
- When Sports , Night portrait , Dusk/dawn , Night landscape , Fireworks
show , or Backlighting scene mode is used.
•
Electronic vibration reduction cannot be used in other shooting modes when
using certain settings (
A
42).
•
When Electronic VR is set to Auto , the angle of view (the area captured in the
recorded movie) during movie recording is smaller.
Press the
d
button
M z
menu icon
M
Electronic VR
M k
button
Option Description
w
Auto
When taking still images, electronic vibration reduction
is enabled when
R
(
A
3) is displayed in the monitor
and all of the conditions below are met.
•
Flash mode is set to Off or Slow sync .
•
Shutter speed: Slower than 1/30 seconds (wide-
angle position), 1/60 seconds (telephoto position)
•
Continuous is set to Single .
•
The subject is dark.
When recording movies, vibration reduction is
enabled at all times.
Off (default setting) Electronic vibration reduction is disabled.