manualshive.com logo in svg

Nikon COOLPIX 900, User Manual, Page: 4 / 79

Share
Download
Nikon COOLPIX 900 User Manual Download Page 4

- 4 -

Cautions

Federal Communications Commission (FCC)
Radio Frequency Interference Statement

This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules.  These limits are designed to provide reasonable protec-
tion against harmful interference in a residential installation.  This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communi-
cations.  However, there is no guarantee that interference will
not occur in a particular installation.  If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/television

technician for help.

CAUTIONS

Modifications

The FCC requires the user to be notified that any changes or
modifications made to this device that are not expressly ap-
proved by Nikon Corporation may void the user's authority to
operate the equipment.

Serial Cables

Use the serial cables provided with your COOLPIX 900 (see
page 12 of this manual).  Using other interface cables may
exceed the limits of Class B Part 15 of the FCC rules.

Notice for customers in Canada

CAUTION

This class B digital apparatus meets all requirements of the
Canadian Interference Causing Equipment Regulations.

ATTENTION

Cet appareil numérique de la classe B respecte toutes les
exigences du Règlement sur le matériel brouilleur du Canada.

Notice for customers in European countries

ACHTUNG

Dieses Gerät entspricht den Bestimmungen der EG-Direktive
87/308/EEC zur Störungsunterdrückung. Lärmemission kleiner
70 dBA.

Summary of Contents for COOLPIX 900
















































































Reviews:

No comments