Nikon COOLPIX 8700, Repair Manual

Page: 75 / 81

VAA26001-R.3627.A
- R2
･
E8700 -
Item Criteria Applied tool(s)
Monitor
Shooting image
・
Inclined degree of image shall be 0.5 degree or less.
・
PC monitor and print output
(Output will be evaluated while the display range boundary
of LCD unit is regarded as standard when the through-the-
monitor image is made.)
Photoshop
Printer
Lens capacity
Focal length Wide-end position (Compelling∞)
8.9 mm + 7%
– 4%
Tele-end position (Compelling∞)
71.2 mm + 1%
– 7%
Focal length
Measuring
instrument
Lens drive tool
Open aperture F No.
Peripheral light reduc-
tion
Ghost/Flare
Surface ghost
Distortion
Dust in a picture
Wide-end position (Compelling∞)
F2.8 + 7.8%
– 0.4%
Tele-end position (Compelling∞)
F4.2 + 9.2%
+ 2.8%
• There must not be an extreme light reduction.
• There must not be an outstanding malfunction.
• There must not be an outstanding flare at the center.
• There must not be an outstanding deformation.
• There must not be an outstanding dust in a picture.
Focal length
Measuring
instrument
Lens drive tool
Visual observation
Lens barrel
Zoom • There must not be an abnormal action (for example, the unit
operates one-sidedly or its operation is not smooth or it is
caught).
(As changing the camera's posture, check it in all the
directions.)
Visual observation
AF
Distance measurement
operation
Shortest photograph
distance
Normal
Macro
• Focus must be fit in a selected area.
(Select the AF area and check it.)
The focus of AF must be fit at the following distance.
• 500mm
(Check at each zoom position.)
• Within 30mm from the protection glass surface
(Set to the "Macro" mode.)
(Check at each zoom position in the range where the "Macro"
mode display (tulip) color is changed into yellow.)
Visual observation
Tape measure