JAA33751-R.3646.A
- Ａ50・AF-S VR300/2.8G -
VR adjustment
When making the VR adjustment, refer to the "Instruction Manual" that is attached to the VR lens adjustment
equipment (J15380).
Preparation
①
Set up the VR lens adjustment equipment (J15380) as shown below.
②
Connect the personal computer to the equipment and start the PC.
③
Mount the lens on the equipment. Set the infinity (
∞
) mark of the focus ring to the index.
Refer to the next page for "Procedure for mounting the lens".
WARNING
●
This equipment uses the laser beam.
Do not look at the laser beam directly or
through the laser beam window.
!
Notes:
Keep the approx. 5-m distance from the laser beam window to the radiated surface.
Do not block the light path of the laser beam.
RS232C cable
Laser beam window
VR lens adjustment equipment
（
J15380
）
PC
Laser beam
Power switch
"
SERVO
"
switch
"
VIBRATION"
switch
Summary of Contents for AF-I Nikkor ED 300mm f/2.8D IF
