Nikon 26212, User Manual, Page: 201 / 216

189
Troubleshooting
T
ec
hni
cal
No
tes an
d
In
d
ex
Date and time of
recording are not
correct.
• Still pictures recorded before the clock was set (when the
“Date not set” indicator blinks during shooting) will have a
time stamp of “00/00/0000 00:00”; movie recordings will
have a time stamp of “01/01/10 00:00.” Set the correct
date and time using
Date in the setup menu.
• Check camera clock regularly against more accurate
timepieces and reset as required.
22, 155
155
No information
displayed in
monitor. Shooting data and photo information may be hidden. Press
the
s
button until shooting data or photo information is
displayed.
15
Date imprint not
available.
Date has not been set. 22, 155
Date not
appearing on
pictures even
when
Date
imprint is
enabled.
• A shooting mode that does not support date imprint is
selected.
• Another function that is set now is restricting the date
imprinting.
• The date cannot be imprinted onto a movie.
159
159
-
Camera settings
reset. Clock battery is exhausted; all settings were restored to their
default values.
156
Reset file
numbering
cannot be done.
• Reset file numbering cannot be applied when the
folder number reaches 999 and there are images in the
folder. Change the memory card, or format the internal
memory/memory card.
• Reset file numbering cannot be set when the scene
mode is set to Panorama assist , or when the shooting
mode is
A
,
B
,
C
,
D
or
M
and Intvl timer shooting is
chosen for Continuous in the shooting menu.
174, 181
174, 181
Monitor turns off,
and the power-on
lamp blinks rapidly.
Battery temperature is high. Turn off camera, and allow
battery to cool down before resuming use. After the lamp
blinks for three minutes, the camera will turn off
automatically, but you can also press the power switch to
turn it off manually.
21
Battery inserted
into the camera is
not charged when
the camera is
connected to a
computer.
• The battery is not charged when the camera is turned off.
• Charging stops if the computer enters sleep mode while
the battery is charging. The camera may be turned off.
• Depending upon computer specifications, settings, and
power supply and allocation, it may be impossible to
charge the battery inserted into the camera via computer
connection.
145
-
-
Problem Cause/Solution A