GETTING STARTED
USING ICOPY-X
1. Auto Copy
Automatic scanning, reading and writing of all information from the
original RFID Tag to a new UID card/tag.
2. Scan Tag
Scanning of tag and getting the basic information of the tag type.
3. Read Tag
Reading of all available information of tag (including blocks and sectors).
4.Sniff Traffic
Sniffing of locked sector keys for MIFARE cards/tag.
5. Simulation
Simulation of LF and HF RFID tags.
6. PC-MODE
Enters PC-Mode, used with the supplied USB cable for advanced
command line functions and Mifare cracking
7.Backlight
Switches the screen backlight between Low, Middle and High
8. Diagnosis
Diagnosis has two modes: User Test: Checks internal memory and
LF/HF antennas. Factory Test: Used by the factory pre-sale
9. Volume
To adjust voice prompts and button volume
10. About
Displays the Serial Number, Firmware and Hardware information.
4
Summary of Contents for ICOPY-X
Page 1: ...Instruction Manual ...
Page 2: ...UK Version iCopy XS ...