Niko 10-824-01 Manual Download Page 11

10-824-01

11

Jumper J1 and J2

J1: defining terminal resistor

J1 horizontally

 over both bottom pins: video splitters NOT as last appliance 

on the video bus

J1 vertically

 over both left pins: video splitter as last appliance on the 

video bus

J2: defining 5/6-wire cabling

J2 horizontally

 over both bottom pins: video splitter used in a 6-wire video 

system (terminal b and M interconnected)

J2 vertically

 over both left pins: video splitter used in a 5-wire video 

system

4. TECHNICAL DATA

Supply voltage............................................. +24V ±8%
Cover .......................................................... 4U
Weight ........................................................ 130g
Operating temperature ................................ 0 to 40°C
Input impedance J1 (terminal resistor .......... 100Ω
Input current ............................................... I(a)=0,0mA; I(Pmax)=75mA
Signal gain .................................................. 0dB to +12dB* (linear)
Max. output signal....................................... 4Vpp*
* in case of 1Vpp at the input and terminal resistor of  100Ω (J1)

5. LEGAL WARNINGS

- The installation has to be carried out by a qualified person and in compliance with the 

statutory regulations.

- This user manual has to be handed over to the user. It has to be included in the electri-

cal installation file and has to be passed on to any new owners. Additional copies are 
available on the Niko website or via the support service.

- During installation, the following has to be taken into account (not limited to list below):
  - The statutory laws, standards and regulations;
  - The state of the art technique at the moment of installation;
  - This user manual, which must be read within the scope of each specific installation, 

only states general regulations;

  - The rules of proper workmanship
- In case of questions, you can consult Niko’s support service or contact a registered 

control organisation.

  Support Belgium: 

Support UK:

  +32 3 778 90 80 

+44 1525877707

  website : http://www.niko.be 

website: http://www.nikouk.com

  e-mail: [email protected] 

e-mail: [email protected]

EN

Summary of Contents for 10-824-01

















Reviews: