41
SK
10-803
6. STRUČNÝ OPIS
• Je možné pripojiť externú jednotku pomocou inštalácie typu slave (max. 4)
• Je možné pripojiť max. 5 externých jednotiek 10-80 (pre max. 20 inštalácií typu slave)
• Ak vytvoríte spojenie prostredníctvom 10-803, tak je možné v rámci inštalácií typu slave uskutočňovať hovory, a takisto môžete uskutočňovať hovory medzi
inštaláciou typu slave a hlavnou externou jednotkou.
• Indikovanie stavu pre aktívne spojenie s inštaláciou typu slave
• Maximálny odpor linky: 20 Ω
• Funkcia otvárania dverí s integrovaným zdrojom napájania: 12 V, 50 - 60 Hz / 2 A (el. zámky väčšie/rovné 6 Ω)
• Štandardný čas otvorenia dverí: 3 sek., pevne nastavené
• Linka a P svorka sú odolné voči skratu.
• Ochrana proti preťaženiu pre vodič P
• Hovor je možné uskutočniť len prostredníctvom hlavnej externej jednotky cez inštaláciu typu slave, keď príslušná hlavná externá jednotka predtým odoslala
volanie od dverí
7. TECHNICKÉ ÚDAJE
Vstupné napätie
230 V ± 10 %, 50 - 60 Hz
Kryt
sériový kryt na zapustenú montáž pre 6 TE
Hmotnosť
580 g
Prípustná prevádzková teplota
od 0°C do 40°C
Stupeň ochrany
II
Výstupné napätie
+24 V ± 8 %
Výstupná prúdová svorka a
I(a) = 35 mA (na linke)
Výstupná prúdová svorka P
I(P) = 60 mA
Externá sieťová poistka
16 A (odporúčané)
8. PRIPOJENIE MODULU
POZOR!
Prevádzkový režim je nastavený na MASTER. V tomto prevádzkovom režime nie je možné pripojiť žiadny dodatočný zdroj napájania
alebo riadiacu jednotku.
Ak je na paralelný spínač na vstupe pripojená druhá jednotka 10-803, tak ju musíte najprv dostaviť do prevádzkového režimu SLAVE. Ak tak
neurobíte, na linkách externej jednotky bude dochádzať k rušeniam.
• Pripojte hlavnú externú jednotku k zbernicovým svorkám 23, 24, 25.
• Maximálna záťaž vodičov P nesmie presiahnuť 150 mA. Ak bude prekročená maximálna záťaž 150 mA, zabudovaná tepelná ochrana automaticky vypne výstup.
Po odstránení preťaženia, keď ochrana vychladne, sa výstup automaticky znovu zapne.
UPOZORNENIE!
Na vodič P nesmiete pripojiť iné svietidlá, napr. rúrkovité!
8.1. Schéma zapojenia
10-803
4x2 (a,b)
3 (a,b,P)