Niko 10-577, Product Information, Page: 46 / 64

EN 46
10-577
3. CONFIGURATION
3.1. Configuration options
The internal video unit can be programmed in 3 ways: manually, with the service unit 10-870 or with the Niko configuration software for access control
(programming interface 10-855 is required). Niko recommends programming with the configuration software.
Function Manual 10-870 Niko configuration
software for access
control 10-854
Factory settings
Ringtone volume x – x Level 5 of 8
Speech volume
x – x
Level 7 of 8
Brightness x – x Level 7 of 8
Contrast
x – x
Level 7 of 8
Colour x – x Level 7 of 8
Video activation time
– – x
80 s
Select ringtones for door calls, internal calls and floor calls x – x door call 11
internal call 7
floor call 3
Ringtone for door call 2 x – x same as door call 1
Serial number for 1. parallel assignment – x x 1000000
deactivated
Serial number for 2. parallel assignment – – x 1000000
deactivated
Function button assignment: control function 8, automatic door
opener, internal call or call forwarding
– x x Control function 8
Call interruption following internal call on/off
– – x
OFF
Change audio external video unit limit – – x limit = 0
Call suppression
x – –
OFF
Block ringtone selection – – x OFF
Block ambient lighting on/off manually
– – x
OFF
Ambient lighting in standby on/off x – x ON
Ambient lighting as an additional incoming call notification
– – x
ON
Floor door opener on/off – – x OFF
Toggle between hands-free mode on/hands-free mode off
– – x
Hands-free mode
Switch between using the same speech volume for door and
internal calls/ adjusting the speech volume for door and internal
calls separately
x – x together
Always transmit long door opener protocol
– – x
OFF
Door opens with a 3-second delay when automatic door opener
has been activated
– – x OFF
Unlimited call time – – x OFF
Load factory settings
– – x